// // Leave a Comment

CyanogenMod 11 ROM for Galaxy S2 I9100 - Android 4.4.2 KitKat

CyanogenMod 11 (Android 4.4.2 KitKat) for Galaxy S2 I9100 is a new Nightly ROM which is available for download. It is a free, community built, aftermarket firmware distribution of Android 4.4.2 (Kit Kat), which is designed to increase Performance and Reliability over Stock ROM for your device. You can now Install CM 11 Android 4.4.2 KitKat Custom Firmware using our tutorial belowThis is an Official Nightly ROM released by CyanogenMod, but still it would require a custom recovery like CWM in order to flash the ROM zip file on your phone. Your Galaxy S2 I9100 should be rooted and have a custom recovery (ClockworkMod recovery / TWRP recovery) installed.



In this tutorial, we will tell you how to install CyanogenMod 11 Android 4.4.2 KitKat Nightly ROM on Galaxy S2 I9100 with complete steps using CWM recovery. We also have several tips on how to backup your phone data and also some more tips that you have to keep in mind before proceeding to the tutorial below. You will have to wipe your previous personal data and apps as usual when installing custom ROMs. The following tips are important as they will help the installation procedure to go smooth without any issues. Let’s begin with the tutorial below.

Disclaimer: All the custom ROMs and firmwares, official software updates, tools, mods or anything mentioned in the tutorial belong to their respective owners/developers. We (MyTrickSource) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial:)

There are tons of useful articles on MyTrickSource for Galaxy S2 I9100 but we think you might be interested in the following post:

Samsung Galaxy S2 I9100 USB Drivers

You will need to connect your Android phone with the computer. For that, please make sure you have installed the USB drivers for Samsung Galaxy S2 I9100 properly. If not, you can download the latest official drivers from our Android USB Drivers section here:
Download Samsung Galaxy S2 I9100 USB drivers!

Backup and Other Important Tips

Done with the USB drivers? Perfect. Now please take a look at the following tips and important points you need to take care of. These are important, as we don’t want anyone losing their personal data or apps:
Always backup your important data that you might need after you install a new custom ROM, an official software update or anything else. Make a backup for just in case, you never know when anything might go wrong. See below for some tips on how to backup data: 
Samsung users can also back up data using Samsung KIES. If you backup data manually, you get more options what to choose from and it is very easy to move data across Android devices from different manufacturers, i.e moving Samsung Galaxy S3 backup data to HTC One X.
    If you already have a custom recovery (ClockworkMod, TWRP etc.) installed on your phone, we strongly recommend a backup using that as it creates a complete image of your existing phone set up.

A few more optional tips that you should remember:

        1. Having problems connecting your Android phone to the computer? You need to enable USB debugging mode.

        2. Make sure your Android device is charged up to 80-85% battery level. Why? Because, if your phone goes off suddenly while installing a custom ROM, flashing an official firmware update or installing mods etc. — your phone might get bricked or go dead permanently. No one wants that, right?

        3. Most of the tutorials and how-to guides on MyTrickSource are for factory unlocked Android phones and tablets. We recommend NOT to try our guides if your phone is locked to a carrier, unless we have specified the carrier name or device model.

If you find the above tips useful and they were helpful to you, please consider giving us a +1 or LIKE on Facebook to thank us!

All set and ready? Good. Now, let’s proceed with the tutorial below and update Galaxy S2 I9100 to CyanogenMod 11 Android 4.4.2 Nightly ROM.

How to Install CyanogenMod 11 Android 4.4.2 Nightly ROM on Galaxy S2 I9100

We have put together a detailed step-by-step instructions guide on how to install CM 11 Android 4.4.2 KitKat Nightly ROM on Galaxy S2 I9100. If you are used to installing custom ROMs on your Galaxy S2 I9100, then this should not be any different for you.

However, for beginners, you need to root your Galaxy S2 I9100 and install a custom recovery. Please Google that up if you are unsure and make sure you read the tutorial once before actually performing it on your device.

To Remember:

  • This tutorial is only for installing CM 11 Android 4.4.2 KitKat Nightly on Galaxy S2 I9100. Please do not try on any other Galaxy Mega variants.
  • Your phone should be rooted and have ClockworkMod recovery installed from before.
  • This tutorial will wipe out all your data. Proceed at your own risk.
  • Perform a Dalvik Cache wipe before proceeding from the recovery mode.
  • Samsung KIES will NOT detect your phone after installing this ROM because it is a custom firmware.
  • Make sure you backup all your data in your phone before proceeding.

Entire Step-By-Step Instructions:


Step 1 - Download CM 11 NIGHTLY - I9100 and Google Apps for Galaxy S2 I9100 to your computer.

If CM 11 link does not worktry alternate link here!

Step 2 - Connect and mount your Galaxy S2 USB memory on your computer using the USB cable.

Step 3 - Now copy/paste the downloaded Android 4.1.2 ROM zip file to your SD card. Make sure the file is in the SD card root (not in any folder).

Step 4 - Then turn OFF your phone and disconnect from the USB cable.

Step 5 - Now to get in the Recovery Mode. Switch ON the phone while pressing and holding Volume Up + Home + Power buttons together. You will get an exclamation mark now. Again, hold your Volume Up + Power buttons. You should now be in your Recovery Mode. 

Step 6 - Once you are in ClockworkMod Recovery, select perform a full data wipe by selecting “wipe data/factory reset”  Use the Power button to select everything while in the Recovery Mode.

Step 7 - Then, perform a cache wipe by selecting “wipe cache partition”.

Step 8 - Now this is optional, but it is recommended to perform a wipe of your dalvik cache as well. You will not get into boot loops or any other errors. From CWM recovery, go to ‘advanced’ and then select “wipe dalvik cache”.

Step 9 - Then go back to the main recovery screen and select “install zip from SD card”.

Step 10 - Now select “choose zip from sdcard”. Using your volume keys, navigate to the CM 11 Nightly ROM zip file that you copied to your SD card and select it using the Power button. Confirm the installation on the next screen and the installation procedure should start now.

Again, repeat the Step 10 for Google Apps as well.

Step 11 - After the installation completes, go to “+++++Go Back+++++” and reboot the phone by selecting “reboot system now” 

Your Galaxy S2 I9100 will boot now and it might take about 5 minutes to boot on your first time. So, please wait....

That’s it! Your Galaxy S2 I9100 should now have Android 4.4.2 KitKat Nightly ROM installed on your phone! Go to Settings > About phone to verify.

Hit +1 or LIKE on Facebook to thank us!

Need Help?

If you run into any problems in Installing CM 11 Android 4.4.2 KitKat Nightly ROM on Galaxy S2 I9100, feel free to drop us a comment below and we will reply you back ASAP with the fix or the solution to your problem.

0 comments:

Post a Comment